Concrete Contractor in Norco, CA - Driveways and Patios on a Solid Base
Superior Eastvale Concrete is a concrete contractor based in Eastvale that pours driveways, patios, walks, steps and retaining walls for homes in Norco, with the base dug out and packed before any concrete goes down.


We pour in Norco. We start with the ground.
We're based in Eastvale and pour driveways, patios, walks and walls in Norco, the same work we do in Chino and Corona.
The city's own findings say thin alluvial soils, the dirt rivers leave behind, give certain areas a moderately high chance of liquefaction, which is ground going soft when it shakes. So I look at what's under a slab before I talk about what goes on top.

Every job starts underneath. The finish comes later.
Before I price a Norco job, I check what the slab has to carry, where water runs and what the subgrade, the dirt it sits on, is like. Size, thickness, steel and how much digging the base needs set the price, and a permit, if the job needs one, moves the schedule. The written estimate gives you your number.
- Where water runs off the new slab
- How deep to dig out and pack
- Where the joints go before the pour
Driveways are a start. We pour the rest in Norco too.
- Concrete driveway building
- Concrete patio construction
- Stamped concrete services
- Concrete sidewalk building
- Garage floor concrete
- Decorative concrete
- Concrete retaining walls
- Concrete floor installation
- Concrete pool decks
- Concrete steps construction
- Slab foundation building
- Foundation installation
- Concrete parking lot building
- Concrete footings
- Foundation raising
- Concrete cutting

Good concrete stays flat. Bad concrete keeps you busy.
Concrete cracks some, and I'd rather say so before you sign. The jobs I spent years fixing were worse, slabs sinking because the dirt was raked level instead of dug out and packed, slabs tipped toward the house, and cracks wandering because nobody cut control joints, the grooves that tell a crack where to go.
If the budget's tight, cut the fancy finish before the base, because nobody sees the base on day one and everybody sees it when it fails. Where the dirt is soft we dig deeper, add rebar, the steel that holds the slab together, and cut joints on time.
Here's how it runs. From your call to the final walk-through.
Call or send a request
Call (951) 416-3327 or use the form, tell us what you want poured and where, and we'll set a time for me to come out.
I look at the site
I come out myself, walk the spot with you, and ask what the concrete has to carry and where the water ends up after a storm.
Your price in writing
I measure, then put the price in writing, with the base work, steel and finish spelled out so you can see what you're paying for.
Permit, pour and walk-through
If the job needs a permit, we pull it. Our crew forms, pours, finishes and cleans up, and I walk the finished work with you.
Tell me about the job. I'll come out and price it.
Tell us what you want poured and where. We respond within 1 business day to set a visit, and the on-site estimate is free, with no pressure to book.
(951) 416-3327Norco is one stop. We work all around Eastvale.
- Eastvale, CA
- Jurupa Valley, CA
- Corona, CA
- Ontario, CA
- Riverside, CA
- Rancho Cucamonga, CA
- Chino, CA
- Chino Hills, CA
- Upland, CA
- Home Gardens, CA
- Bloomington, CA
We're based in Eastvale and pour across the cities around it, including Jurupa Valley and Riverside. If your city isn't on the list, call and ask.
Mon–Sun: 7 AM–10 PM
Norco concrete questions, answered. Permits, licenses and fire zones.
Read the answers below. If your question isn't covered, call (951) 416-3327 and ask me.
Do I need a permit for a concrete driveway or patio in Norco?
Maybe, so I check with the city before we start. Norco's Building & Safety department issues permits for new buildings and for altering or enlarging existing ones, and that wording doesn't settle flatwork, the flat pours like driveways and patios. When a permit is needed, we pull it and set up the inspections.
Does a short retaining wall need a permit in Norco?
Not if it's two feet tall or less, measured from the top of the footing to the top of the wall, under the city's proposed code. That exemption doesn't cover a wall holding back a slope, a driveway or other weight beyond level dirt. We check both before we build concrete retaining walls, and pull the permit when one's needed.
When does a concrete contractor need a California license?
A contractor needs a license from the Contractors State License Board when the job needs a building permit, uses employees or runs $1,000 or more in labor and materials, and a bigger job can't be split to get under that. Norco also requires a City Business License before anyone starts work there. We're licensed and insured.
Does a fire hazard zone in Norco affect a concrete project?
It can if your house sits in a High or Very High zone. The city's guidance says homes there must meet home hardening requirements and that new construction and renovations follow wildland-urban interface building codes. Very High zones also need 100 feet of defensible space around structures. I check your zone at the site visit.





